TTC Nutrient + TTC Nutrient (neutralisers) Dipslides (Box of 10)
The BT2N dipslide (TTC + neutraliser dipslide) is a general purpose dip slide that tests for total count aerobic bacteria / microbes on both sides of the slide. Colonies will appear as red dots. Due to addition of neutraliser, this dipslide is useful for assessing the efficacy of cleaning regimes.
BT2N Volume discounts
|51||£11.33||Up to £32.14|
|101||£10.89||Up to £107.75|
|251||£10.26||Up to £427.48|
|501||£9.70||Up to £1,131.88|
|1000||£7.94||Up to £4,024.54|
|Front Agar Type||Nutrient TTC Neutraliser|
|Front Agar Colour||Straw|
|Front Agar Growth||Total Count (TTC / Red Spot)|
|Rear Agar Type||Nutrient TTC Neutraliser|
|Rear Agar Colour||Straw|
|Rear Agar Growth||Total Count (TTC / Red Spot)|
|Shelf Life||5 - 6 months|
|Suggested Incubation Times||24 - 48 Hours|
|Suggested Incubation Temp||30 - 35 °C|
|Important information||1 - 2 weeks lead time|
Nutrient Agar with TTC and neutralisers. Most Colonies will appear as red spots. This slide offers a total count on both sides.
Ideal for general use in a wide variety of applications and industries. Due to the addition of neutralisers, this slide is ideal for assessing the efficacy of cleaning regimes.
Neutralisers are added to agars to ‘neutralise’ the effect of disinfectants / germicides. The neutraliser aids in the recovery of surviving / viable organisms that have been damaged but not killed by cleaning chemicals. This is useful if you wish to test the efficacy of cleaning agents. The neutraliser will help you get a more accurate result without the efficacy of your cleaning regime being overestimated.
It comes in a pack size of 10 slides per box. The slide has a flexible paddle and is located in a shatterproof container.
Each dipslide features a virtually unbreakable and flexible paddle allowing for even, full surface testing.
Easy Run Off Design
Due to the design of the dipslide, fluids will drain off quickly during testing.
Each slide has a handle built into the lid that is recessed to help keep your fingers dry during testing.
One side of the slide will have a circle indicator so you know which side was used for testing which type of contaminant.
Each dipslide is dual sided to allow multiple contamination testing with one test.
Thick Reliable Agar
Each agar is thick (approx 4mm) and raised above the dipslide to allow for easy surface testing.
This agar contains red spot dye which helps the user view and count colonies as they appear as red spots. Nutrient agar will detect / show growth for a wide range of non fastidious organisms. Due to nutrient agar being able to cultivate such a wide variety of micro organisms, it is used in many industries.
How to use the BT2N dipslide
Simply remove the dipslide and immerse in (or press against) the sample for approx 10 seconds. Remove dipslide and allow to drain (if necessary) for a few seconds, then replace the slide back into the tube and incubate for a minimum of 24 hours (up to a maximum of 48 hours).
A comparison chart is included so you can easily compare your results.
Step 1 : Remove slide
Carefully remove the sterile Nutrient TTC + neutraliser dip slide from its tube ensuring that no contact is made with the agar (to avoid contamination).
Step 2 : If Surface Testing
For surface testing, press the Nutrient TTC + neutraliser dipslide onto the surface. If needed, place a finger on the bottom of the slide (on the plastic, not the agar) to apply extra pressure.
Step 2 : If liquid testing
For liquid testing, immerse the Nutrient TTC + neutraliser dipslide into the fluid for 10 seconds then remove and allow to drain for a few seconds.
Step 2 : If swab testing
Apply a sample of the test substance to a sterile swab and gently apply to the agars.
Step 3 : Incubate Slide
Label the tube with the included stickers then place the slide into an incubator and allow to incubate.
Step 4 : Compare results
Count the amount of colonies that have grown on the slide and compare them to the comparison chart provided.