Plate Count (PCA) + Violet Red Bile Glucose (VRBG) Dipslides (Box of 10)
The TV Dipslide measures a total count on one side and enterobacteriaceae count on the other. Includes neutralisers.
|51||£11.33||Up to £32.14|
|101||£10.89||Up to £107.75|
|251||£10.26||Up to £427.48|
|501||£9.70||Up to £1,131.88|
|1000||£7.94||Up to £4,024.54|
|Front Agar Type||Plate Count (PCA)|
|Front Agar Colour||Straw|
|Front Agar Growth||Total Count|
|Rear Agar Type||Violet Red Bile Glucose (VRBG)|
|Rear Agar Colour||Red/Purple|
|Rear Agar Growth||Enterobacteriaceae|
|Shelf Life||5 - 6 months|
|Suggested Incubation Times||24 - 48 Hours|
|Suggested Incubation Temp||35°C|
The TV dipslide contains a neutraliser (germicide inhibitor) for disinfectants present in the sample, this provides accurate readings in such tests. This Dipslide measures a total count on the front side and enterobacteriaceae count on the other.
It comes in a pack size of 10 slides per box (minimum order of 5 boxes). The slide has a flexible paddle and is located in a shatterproof container.
Each dipslide features a virtually unbreakable and flexible paddle allowing for even, full surface testing.
Easy Run Off Design
Due to the design of the dipslide, fluids will drain off quickly during testing.
Each slide has a handle built into the lid that is recessed to help keep your fingers dry during testing.
One side of the slide will have a circle indicator so you know which side was used for testing which type of contaminant.
Each dipslide is dual sided to allow multiple contamination testing with one test.
Thick Reliable Agar
Each agar is thick (approx 4mm) and raised above the dipslide to allow for easy surface testing.
Includes neutralisers for common germicides. This helps the user assess the effectiveness of cleaning regimes.
Plate Count Agar - A general growth medium that detects a viable / total count in food and water. Mainly used in the dairy industry.
VRBG - Detects enterobacteriaceae. Used predominantly in food safety applications. Growth shows as pink / purple colonies.
How to use the TV dipslides
Simply remove the dipslide and immerse in the sample for approx 10 seconds. Remove dipslide and allow to drain for a few seconds, then replace the slide back into the tube and incubate for a minimum of 24 hours (up to a maximum of 48 hours).
Remove the Dipslide from the container and press against the surface for approx 10 seconds. Replace the slide back into the tub and incubate for a minimum of 24 hours (up to a maximum of 48 hours).
A comparison chart is included so you can easily compare your results.
Step 1 : Remove slide
Carefully remove the sterile Plate Count / VRBG dip slide from its tube ensuring that no contact is made with the agar (to avoid contamination).
Step 2 : If Surface Testing
For surface testing, press the Plate Count / VRBG dipslide onto the surface. If needed, place a finger on the bottom of the slide (on the plastic, not the agar) to apply extra pressure.
Step 2 : If liquid testing
For liquid testing, immerse the Plate Count / VRBG dipslide into the fluid for 10 seconds then remove and allow to drain for a few seconds.
Step 2 : If swab testing
Apply a sample of the test substance to a sterile swab and gently apply to the agars.
Step 3 : Incubate Slide
Label the tube with the included stickers then place the slide into an incubator and allow to incubate.
Step 4 : Compare results
Count the amount of colonies that have grown on the slide and compare them to the comparison chart provided.
- Food safety