Plate Count (PCA) + Oxytetracycline Glucose Yeast Extract (OGYE) Dipslides (Box of 10)
The PO disinfectant neutraliser dipslide has total count on the front side and yeast and moulds count on the rear.
|51||£11.33||Up to £32.14|
|101||£10.89||Up to £107.75|
|251||£10.26||Up to £427.48|
|501||£9.70||Up to £1,131.88|
|1000||£7.94||Up to £4,024.54|
|Front Agar Type||Plate Count (PCA)|
|Front Agar Colour||Straw|
|Front Agar Growth||Total Count|
|Rear Agar Type||Oxytetracycline Glucose Yeast Extract (OGYE)|
|Rear Agar Colour||Straw|
|Rear Agar Growth||Yeasts & Moulds|
|Shelf Life||5 - 6 months|
|Suggested Incubation Times||24 - 120 Hours|
|Suggested Incubation Temp||22°C|
|Important information||1 - 2 weeks lead time|
The PO dipslide contains a neutraliser for disinfectants present in the sample, this provides accurate readings in such tests. It has total count on the front side and yeast and moulds count on the other.
It comes in a pack size of 10 slides per box (minimum order of 5 boxes). The slide has a flexible paddle and is located in a shatterproof container.
Each dipslide features a virtually unbreakable and flexible paddle allowing for even, full surface testing.
Easy Run Off Design
Due to the design of the dipslide, fluids will drain off quickly during testing.
Each slide has a handle built into the lid that is recessed to help keep your fingers dry during testing.
One side of the slide will have a circle indicator so you know which side was used for testing which type of contaminant.
Each dipslide is dual sided to allow multiple contamination testing with one test.
Thick Reliable Agar
Each agar is thick (approx 4mm) and raised above the dipslide to allow for easy surface testing.
Plate Count Agar - PCA is a general growth medium used to provide a 'total count' / detect viable organisms in food and water. Mainly used in dairy testing.
OGYE Agar - This agar contains an antibiotic called Oxytetracycline. Due to this, the dipslide should not be incubated at temperatures above 25 degrees Celcius. OGYE agar detects yeasts and moulds in food.
How to use the PO dipslide
Simply remove the dipslide and immerse in the sample for approx 10 seconds. Remove dipslide and allow to drain for a few seconds, then replace the slide back into the tube and incubate for a minimum of 24 hours (up to a maximum of 120 hours).
A comparison chart is included so you can easily compare your results.
Step 1 : Remove slide
Carefully remove the sterile Plate Count / OGYE dip slide from its tube ensuring that no contact is made with the agar (to avoid contamination).
Step 2 : If Surface Testing
For surface testing, press the Plate Count / OGYE dipslide onto the surface. If needed, place a finger on the bottom of the slide (on the plastic, not the agar) to apply extra pressure.
Step 2 : If liquid testing
For liquid testing, immerse the Plate Count / OGYE dipslide into the fluid for 10 seconds then remove and allow to drain for a few seconds.
Step 2 : If swab testing
Apply a sample of the test substance to a sterile swab and gently apply to the agars.
Step 3 : Incubate Slide
Label the tube with the included stickers then place the slide into an incubator and allow to incubate.
Step 4 : Compare results
Count the amount of colonies that have grown on the slide and compare them to the comparison chart provided.
- Food safety
Customers who bought this product also bought:
RBS dipslide, yeast and moulds on one side and total count on the other.View